درایور استپر موتور 4.5 آمپر TB6600
توضیحات محصول
جهت راه اندازي موتورهاي پله اي از اين درايور استفاده مي شود . اين درايور مبتني بر آيسي TB6600 متعلق به توشيبا ساخته شده است. و قابليت راه اندازي استپ موتور ها در مد "ميکرو استپ" را دارد. در درايو ميکرو استپ تعيين زاويه ي هر گام مقدور مي باشد.
ويژگي ها:
ولتاژ تغذيه:9 تا 42 ولت DC
حداکثر جريان خروجي: 4.5 آمپر
راه اندازي موتورهاي 2 فاز و 4 فاز
ايزولاسيون نوري براي ورودي هاي سيگنال
داراي حفاظت هاي حرارتي و اضافه جريان
حفاظت در برابر افت ولتاژ UVLO
کاربرد:
راه اندازي استپ موتورهاي 2 فاز يا 4 فاز در صنايع ، دستگاه هاي CNC و ...
Overview:
PWM chopper-type bipolar stepping motor driver IC
TB6600HQ / HG is a single-chip PWM chopper-type bipolar sinusoidal micro-step stepping motor driver.
Can control the 2-phase stepper motor forward and reverse rotation,
Phase with a 1-2, W1 -2 phase 2W1 -2 phase, 4W1 -2-phase excitation mode.
Just a clock signal can be driven by two-phase bipolar stepper motor to achieve low vibration, high efficiency operation.
Features:
• Single-chip bipolar sinusoidal micro-step stepping motor driver
• New BiCD 0.13 nm process
• withstand voltage up to 50V
• On-resistance (upper + lower) = 0.4 ohm
• Forward and reverse rotation control
• 5 kinds of sub-modes can be selected (1/1, 1/2, 1/4, 1/8, 1/16 step)
• Output current: IOUT = 5.0A (peak within 100ms)
• Rated output: IOUT = 4.5 A
• Package: HZIP25 - 1.00F
• input pull-down resistor: 100 K?
• alarm output pin Current: Ialert = 1mA
• Output monitor pin (MO): Imo = 1mA
• with reset and enable pins
• With standby function.
• break the traditional single-supply
• Built-in thermal protection (TSD) circuit
• Built-in voltage protection (UVLO) circuit
• Built-in over-current detection (ISD), circuit
High current 4.5A, high voltage 45V, output short circuit protection, superior performance!
1) Operating voltage DC 10V-45V. Switching power supply DC 32V is recommended.
2) 6N137 high-speed optical coupling, high-speed without losing step.
3) Toshiba's new high-current, high voltage TB6600HG new original chip , with low-voltage shutdown, over- temperature shutdown and overcurrent protection circuit, and increased compared to TB6560 short-circuit protection .
4) Rated maximum output: ± 4.5 A.
5) Suitable for 42,57,86 two-phase / four-phase / four-wire / six-wire stepping motor within 4.2A.
6) automatic semi-flow function .
7) Subdivision: Full Step, Half Step, 1/4 Step, 1/8 Step, 1/16 Step, Max.
8) Volume: Width 50 * Length 82 * Height 35 (MM)
Features :
1, the output current stepless adjustable to meet your needs of a variety of applications.
2, automatic semi-flow function. And with automatic semi-flow switch, easy to use.
3, using 6N137 high-speed optical lotus, to ensure high-speed without losing step.
4, the board printed on the back of the sub-set instructions.
5, with increased heat sink, good heat dissipation.
6, with output short-circuit protection, the use of worry.
7, using a total of Yang input, there are two input terminals, wiring more convenient.
